CRY436 is a single-axis acceleration sensor. The output mode is a 2 – core connector that complies with the MIL – C – 5015 standard and is installed on the object through an 1/4-28 coupling bolt. It is often used for on-line monitoring of vibration state of industrial equipment.
CRY436 can be equipped with armored shielded cables to measure vibration parameters such as acceleration, velocity, and displacement under strong interference conditions such as industrial and electric power.
| Output | IEPE |
|---|---|
| Sensitivity (25℃) | 100mV/g(160Hz) |
| Axis | Uniaxial |
| Measuring Range (peak) | ±50g pk |
| Frequency Response Range | 0.5Hz to 10kHz(±3dB), 1Hz to 6kHz(±10%) |
| Output Impedance | <100Ω |
| Full Scale Output (peak) | ±5V |
| Noise | ＜50uV |
| Operating Temperature | -40℃ to 120℃(-40℉ to 248℉ ) |
| Threaded Interface | M6 |
| Connector Type | Side 5/8-24 (2-pin socket) |
| Construction | Shear |
| Piezoelectric Materials | PZT-5 |
| Excitation Voltage | 18VDC to 28VDC (Constant Current Source) |
| Constant Current Source | 2mA to 10mA |
| Bias Voltage | 12V±2V |
| Case Material | 304 Stainless Steel |
| Install Ground Insulation | ≥10^8Ω |
| Level of Protection | IP65 |
| Weight | 48g |
Need help choosing the right configuration?
Send us your product inquiry and we’ll help you select the right setup.
CRY436
